Adding The Bend track to your SpeedAngle Lap Timer

Updated 19th April 2018
Moved the Start Finish Line closer to last corner.

Please note that the Apex device will have all Australian tracks pre-loaded except The Bend. This shows you how to add another track to your Speedangle Lap Timer. The process is the same for GMOS JI100S model.

Any timer purchased after 20/4/2018 will already have both bend tracks pre-loaded.

All Files

THE BEND INTERNATIONAL CIRCUIT 4.95km

At 4.95km long, the International Circuit will be ideal for Supercars, Superbikes, national series events right through to state racing, club racing and private hire. 
https://www.thebend.com.au

STEP 1
Download the SpeedAngle R4 Apex software.

SpeedAngle R4 Apex Software R4 Apex R007.exe.zip [Updated 27/1/2018]
SpeedAngle R4 Software (No installation required. Unzip before use.)
If you have the GMOS JI100S then your current software is all you need and you can follow the same steps.

STEP 2
Download The Bend (2 Sectors) Track or Bend International (4 Sectors).

Direct Download The Bend https://www.dropbox.com/s/o2p2nnkr9pofmdx/The%20Bend.SATrack?dl=0

Direct Download Bend International https://www.dropbox.com/s/j24dtfxwv28mrkm/The%20Bend%20Inter.SATrack?dl=0

STEP 3
Install USB Driver
Important Download ~> FTDI USB Driver for Windows, setup executable

STEP 4
Open SpeedAngle R4 Software and then connect Lap Timer to USB Port

STEP 4A
Check that you have the latest SpeedAngle Firmware version on your timer. https://www.mototrack.com.au/firmware-update-speedangle-apex-lap-timer.html

STEP 5
Select Track Manager in Menu under Tools

STEP 6
Touch on first Line to bring up menu

STEP 7
Select load from file.

STEP 8
Select The Bend from the location you saved track.

STEP 9
Track has been placed in Postiion 1

Once finished adding track at STEP 9 you must then hit Connect Device Button, wait for device to be connected and then select Upload Tracks.

That's it, your'e done. Safe riding on and off the track.

If you are happy with us, please feel free to tell Us!.
Testimonial Page – Click on “New Comment” at bottom of page.

A lap around The Bend with Troy Herfoss.