Please note that our cut-off times have changed due to changes in lodgement times.
All orders received before 12:00pm will generally be shipped the same business day.
Orders received after 12:00pm will be shipped the next business day.
We use Australia Post for all items under 5kg within Australia and Oversea's.
Special orders are shipped within 72 hours after confirmation of payment.
We use TNT/FedEx for all bulky items over 5kg
How can I track my order?
You should receive a tracking number via email when your order ships.
Depending on your location, you can track your order.
Australia Post Tracking http://www.auspost.com.au/track
TNT/FedEx Tracking https://www.tntexpress.com.au
Please note: Some products are shipped directly from the supplier's warehouse
to avoid delay to you our important customer.
Please sign in so that we can notify you about a reply
Healtech Electronics QuickShifter easy utilises Bluetooth or WiFi technology iOS + Android app for setup.
Plug ‘n Go kits for most bikes, plus a sensor that works on every bike!
iQSE module types by communication interface:
The iQSE units are available with either Bluetooth or WiFi interface:
- iQSE-1, iQSE-2, iQSE-3: Bluetooth
- iQSE-W1, iQSE-W2, iQSE-W3: WiFi
iQSE module types by model number:
There are three iQSE model numbers that determine the bike compatibility:
- iQSE-W1: for bikes with TCI (Transistor Controlled Ignition). TCI is the current technology and most bikes on the road today require the iQSE-W1.
- iQSE-W2: for most bikes with CDI (Capacitor Discharge Ignition).
- iQSE-W3: for some bikes with CDI (Capacitor Discharge Ignition) and push-to-stop switch.
Other than this, the two module types are the same, use the same harness kits and work on the same motorcycles. Availability depends on the country of purchase.
|
|
|
|
|
Awesome tech |
Simple Installation |
Best Choice |
| Change settings any time you wish through your phone, wirelessly, without hassle. | With our special ring sensor and the bike specific wiring harnesses, installation couldn’t get any simpler than this. | Packed with unbeatable features for an unbeatable price. |
As easy as it can get
The product was designed with the average rider in mind to make the installation and setup as simple as possible yet it has all the features needed for pro racers too.
Supreme compatibility
One sensor that works on all motorcycles, also with reverse (race) shift pattern. Plug ‘n Go harness kits are available for most bikes. Compatible with all our products too.
Small yet powerful
The iQSE module comes in a small package so you don’t have to sacrifice your under-seat storage space.
Wireless connectivity
The iQSE is the only quickshifter module on the market which utilizes WiFi technology and an Android / iOS app for setup and verification. Can even be disabled with a few taps to restore factory condition e.g. for servicing the bike.
You’re in safe hands
The module is weather and shockproof and comes with our 2-year warranty. We offer free and automatic software updates for the lifetime of this product. Even the module firmware is updated automatically via WiFi (with our zero-risk technology) making the product future-proof.
User & Install Manuals, F.A.Q.
- iQSE User Manual
- QSE Sensor Install Guide
- iQSE Frequently Asked Questions
- iQSE Troubleshooting Guide
- iQSE Fine-tuning Guide
Application list by Part Numbers
All variants, special editions and BOTH ABS and non-ABS models are supported, except where noted for the selected bike model/year.
Please use HT Product Advisor to find the correct part number for your bike.
iQSE application list (updated) – Click Here
| Supplementary Manuals | ||
| Our products are supplied with install instructions applicable to all bikes listed for that specific part number. However, to help our customers we are offering Supplementary manuals for some of the popular bikes. If you do not see a manual for your bike, check out one for a similar model and you get the idea what is involved. Most documents are applicable to a wider range of bike models/years than shown here. Important: The supplied instructions should always be followed carefully. |
||
Current model with WiFi (part number: iQSE-W1/W2/W3)
iQSE-W app for iOS devices > App Store
iQSE-W app for Android devices > Google Play Store
Current model with Bluetooth (part number: iQSE-1/2/3)
iQSE app for iOS devices > App Store
iQSE app for Android devices > Google Play Store
Discontinued model with Bluetooth (part number: QSE-1/2)
QSE app for Android devices > Google Play Store
iQSE User Manual
QSE Sensor Install Guide
iQSE Frequently Asked Questions
iQSE Troubleshooting Guide
iQSE Fine-tuning Guide
1. My bike has a shift rod, where should I mount the sensor?
If the upshift pushes (compresses) the sensor in the rod, we recommend installing the sensor in the rod.
Otherwise, install the sensor under the bolt of the shift arm.
In any case, the install is simple and no need to make any alterations.
Please check out our iQSE install video and Sensor install guide on our website.
2. Is it difficult to install the kit?
In order to reach the coil connectors, normally the fuel tank has to be removed and on certain bikes the airbox too.
The actual installation of the kit is quick and simple. All parts are included.
3. Why is the QSX harness more expensive by about $40?
The QSX harness is needed for some bike models. It has a module integrated with which the ECM does not detect the ignition cut and the FI light will not come on.
4. Can you guarantee that the FI light will not illuminate when using the iQSE?
Yes! The iQSE works without causing FI problems even on those bikes for which all other QS systems fail.
5. Can I transfer the iQSE sensor and the module to my next bike?
Yes. If the new bike is a different brand, you may need to get a new Harness Kit.
If you have two bikes, you may install a harness kit and sensor in both, and share the unit between the two. It takes only a few seconds to load your presets.
6. Is the kit listed for my bike plug and play?
All our Harness Kits are plug and play. The only exception is the QSH-CKP, which is the universal kit to be used with the iQSE-2 module. It requires tapping 3 wires (wire tap connectors are supplied, no need to cut any wires).
7. What is the supplied “Jumper plug” for?
Should you need to disconnect the iQSE module for any reason, connect the Jumper plug and the engine will run normally.
If the engine does not run with the Jumper plug fitted, there’s a wiring problem, a connector is loose, etc.
8. Will the iQSE drain my battery?
Absolutely not! The iQSE does not get any power when the ignition key is switched off. You can confirm this via the iQSE LED. During operation it consumes less than 1W.
![HealTech Gear Indicator GIPro DS-Series G2 [GPDT]](https://mototrack.com.au/images/thumbnails/170/170/detailed/26/GPDT.png "HealTech Gear Indicator GIPro DS-Series G2 [GPDT]")
![HealTech Gear Indicator GIPro X-Type G2 [GPXT]](https://mototrack.com.au/images/thumbnails/170/170/detailed/13/GPXT_2ayo-ip.png "HealTech Gear Indicator GIPro X-Type G2 [GPXT]")
![HealTech QuickShifter Easy iQSE-W1 - Module and Sensor Only [No Harness]](https://mototrack.com.au/images/thumbnails/170/170/detailed/19/IQSE-W1_module.jpg "HealTech QuickShifter Easy iQSE-W1 - Module and Sensor Only [No Harness]")
![HealTech QuickShifter Easy Harness Only [QSH, QSR & QSX]](https://mototrack.com.au/images/thumbnails/170/170/detailed/6/QSH-Harness.jpg "HealTech QuickShifter Easy Harness Only [QSH, QSR & QSX]")
Secure Shopping
Customer Service
We ship Australia Wide 
Full Product Warranty
30 Day Return Policy
Healtech Electronics Support
SpeedAngle Support
