Rizoma Multifit FR444B Mounting Kit - Black

In stock
R-FR444B

$49.95
(Inc. GST)

Brands:

Mounting kit for Rizoma Light Unit Turn Signals

The Multifit FR444B mounting kit allows the fitting of Rizoma Light Unit turn signals in easy, fast and adaptable way.
The kit consists of two aluminum brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminum clamping nuts, included in the kit.

SKU FR444B

+
In stock

Mounting kit for Rizoma Light Unit Turn Signals

The Multifit FR444B mounting kit allows the fitting of Rizoma Light Unit turn signals in easy, fast and adaptable way.
The kit consists of two aluminum brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminum clamping nuts, included in the kit.
For a better fastening, a cleaning set is provided to prepare the surface on which the brackets will be placed.

Colours Black anodized

Technical information

  • To get the kit correct fastening, Rizoma recommends to carefully follow the provided mounting instructions, with respect to the suggested timing and steps.

    For front turn signals on faired bikes, Rizoma recommends the mounting in the inner side of the wheel compartment, making sure that the turn signals do not interfere with the wheel movement.

    Attention, the potential position change of the turn signals with reference to the OEM, must always respect that:
    - the light beam has to be longitudinal in the direction of travel;
    - the distance between the two turn signals has to be 240 mm in the front position and 180 mm in the rear.

    The kit includes two brackets and two clamping nuts in anodized aluminum, double-sided 3M tape (VHB 4941), a cleaning and surface preparation set (isopropyl alcohol-soaked wipe and primer stick), and two adhesive cable clips.

    Warning: the FR444B mounting kit is only compatible with Rizoma Light Unit indicators.

Rizoma indicators come standard with resistors (10 W/ 15Ω ea).
When replacing OEM turn signals with the Rizoma Vision, with sequential flashing, to avoid incompatibility due to the resistors and the OEM electronic control unit, Rizoma always recommends the substitution of four Vision turn signals, two in the front position and two for the rear (excluding cases where the turn signals are integrated in the front optical unit, in the rear-view mirror or in the front fairing).

 

Brands:
Rizoma

User Manual (MI_FR130_00.pdf, 5,254 Kb) [Download]

Good to know