Firmware Update R014 Speedangle Apex Lap Timer
SpeedAngle Firmware Update – Current Firmware version is DASH_APEX, ENG.R014 – Released 22nd August 2018
All Speedangle files are located in our Dropbox via the link below:
1. Download Firmware
Please choose one to download according to your location:
APEX LAP TIMER ONLY
- DashApex ENG.R014.sadfu2 This update is strongly recommended for all users with firmware ENG.R007, ENG.R009, ENG.R010, ENG.R011 & ENG.R012.
2. Connect Your Device
Launch SpeedAngle R4 Software, go to MENU -> TOOLS -> LOG DOWNLOADER.
Click on “CONNECT DEVICE”. Once your timer has been connected via USB, its firmware version will be shown at the bottom of the dialog window:
3. Upload Firmware
Click on “DEVICE FIRMWARE UPDATE” at the bottom. Read the warning message carefully, and then click OK.
Browse to find the latest firmware file you downloaded. The upload will take about 15 seconds. Once it is done, you will see “Firmware Update Success” beside the firmware version at the bottom of the dialog window. Your device will also reboot automatically when completed.
During the update process, DO NOT power the device off, disconnect the device from the computer, or do anything that may interrupt the process. Otherwise, the firmware may be incomplete and can be fixed only by sending the device back to our warehouse.
If the update fails you can just close window and reopen log downloader and reconnect timer and try the firmware update again.
4. Check Firmware on Device
To check if you device has been updated, simply close window and reopen and connect device. The firmware number ENG.R012 should be located just below Change User Name button. If it has DASH_APEX_ENG.R014 then your firmware upgrade has been applied.
5. Join our Facebook Community page.
Please join our SpeedAngle Community page on facebook to get lots of tips and updates on what SpeedAngle can do for you out on the track.
Feel Free to leave comments below about your experience with the information provided. We also offer support via TeamViewer remote desktop software.
6. Having trouble connecting to the computer.
No posts found